소형 엔진 정비사(ANZSCO 321214)

Saturday 11 November 2023

호주로 이민을 고려하고 계시나요? 다양한 기회와 높은 삶의 질을 갖춘 호주는 새로운 시작을 원하는 사람들에게 인기 있는 여행지입니다. 이 종합 가이드에서는 호주를 새로운 보금자리로 삼고자 하는 사람들이 이용할 수 있는 이민 절차, 필수 서류, 비자 옵션에 대해 알아봅니다.

이민 절차

이민 절차의 첫 번째 단계는 해당 국가의 호주 대사관에 소송을 제기하는 것입니다. 대사관은 신청 절차 전반에 걸쳐 지침과 지원을 제공하므로 원활한 여행을 위해 대사관의 지시와 지침을 따르는 것이 중요합니다.

필수서류

호주 이민을 신청할 때 특정 서류를 제공해야 합니다. 여기에는 다음이 포함됩니다.

<테이블> 교육 문서 귀하의 자격을 증명하는 성적 증명서, 학위, 졸업장 및 증명서 개인 문서 출생 증명서, 결혼 증명서(해당되는 경우) 및 귀하의 신원과 배경을 입증하는 기타 신분증 재무 서류 자신과 동반 가족 구성원을 부양하기 위한 은행 명세서, 고용 계약 또는 기타 재정적 안정성에 대한 증거. 여권 및 사진 예정된 체류 기간 동안 유효한 유효한 여권과 신원 확인을 위한 최근 여권 크기의 사진.

비자 옵션

호주는 이민자를 위한 다양한 비자 옵션을 제공하며 각 비자 옵션에는 고유한 자격 기준과 혜택이 있습니다. 가능한 비자 옵션은 다음과 같습니다:

  • 기술 독립 비자(Subclass 189): 수요가 높은 직업에 대한 기술과 자격을 갖춘 개인을 위한 것입니다. 지원자는 포인트 기반 자격 기준을 충족해야 하며 해당 직업이 관련 기술 직업 목록에 등재되어 있어야 합니다.
  • 기술 지명 비자(Subclass 190): 개인이 호주의 특정 주 또는 지역에서 거주하고 일할 수 있도록 허용합니다. 지원자는 주 또는 준주 정부에 의해 지명되어야 하며 지명된 직업에 대한 자격 기준을 충족해야 합니다.
  • 기술직 지역 비자(Subclass 491): 호주의 지역 지역에서 거주하고 일하려는 개인을 위해 고안되었습니다. 신청자는 주 또는 준주 정부가 지명하거나 적격 가족 구성원의 후원을 받아야 합니다.
  • 임시 대학원 비자(Subclass 485): 최근 호주에서 학업을 마친 국제 학생들이 일시적으로 머물면서 일할 수 있도록 허용합니다. 비자에는 대학원 취업과 졸업 후 취업이라는 두 가지 스트림이 있으며 각각 고유한 자격 기준이 있습니다.
  • 고용주 후원 비자: 임시 기술 부족(TSS) 비자(Subclass 482) 및 고용주 지명 제도(ENS) 비자를 포함하여 호주 고용주로부터 취업 제의를 받은 개인을 위한 비자 옵션 (하위 클래스 186).

주/준주 추천

많은 비자 옵션에는 주 또는 준주 지명이 필요합니다. 즉, 신청자는 특정 주 또는 준주 정부의 지명을 받아야 합니다. 각 주 또는 준주에는 고유한 자격 요건과 직업 목록이 있으므로 관심 있는 분야의 추천 절차를 조사하고 이해하는 것이 중요합니다.

주/준주 자격 요약

다음은 비자 하위 클래스 190 및 491에 대한 주/준주 자격 요약표입니다.

<테이블> 호주 수도 특별구(ACT) ACT 중요 기술 목록에 나열된 특정 직업에 대한 지명이 가능합니다. 캔버라 거주자, 해외 지원자, 박사 학위 간소화된 지명 및 상당한 경제적 이익에 대해서는 서로 다른 요구 사항이 적용됩니다. 뉴사우스웨일스(NSW) NSW 기술 목록에 있는 직업에 추천 가능. NSW에 거주하는 숙련된 인력, 해외 지원자, NSW 졸업생에게는 다양한 요구 사항이 적용됩니다. 노던 테리토리(NT) NT 거주자, 해외 지원자 및 NT 졸업생에게 추천이 가능합니다. 각 스트림마다 다른 요구 사항이 적용됩니다. 퀸즐랜드(QLD) QLD에 거주하는 숙련된 근로자, 해외에 거주하는 숙련된 근로자, QLD 졸업생 및 QLD 지역의 중소기업 소유자에게 추천이 가능합니다. 각 스트림마다 다른 요구 사항이 적용됩니다. 남호주(SA) 남호주 졸업생, 남호주에서 일하는 개인, 고도로 숙련되고 재능 있는 개인에게 추천이 가능합니다. 각 스트림마다 다른 요구 사항이 적용됩니다. 태즈메이니아(TAS) 중요 역할 목록에 나열된 주요 역할에 대한 추천 가능및 해외 숙련 직업 프로필. 각 스트림마다 다른 요구 사항이 적용됩니다. 빅토리아(VIC) VIC에 거주하는 숙련된 인력과 VIC 졸업생을 추천할 수 있습니다. 각 스트림마다 다른 요구 사항이 적용됩니다. 서호주(WA) WASMOL 스케줄 1 및 2에 해당하는 직업을 가진 일반 스트림 지원자와 대학원 스트림 지원자에게 추천이 가능합니다. 각 스트림마다 다른 요구 사항이 적용됩니다.

결론

호주로 이민하는 것은 신중한 계획과 고려가 필요한 중요한 결정입니다. 이민 절차, 필수 서류, 이용 가능한 비자 옵션을 이해함으로써 개인은 여행을 더욱 효과적으로 진행할 수 있습니다. 호주로의 성공적이고 원활한 전환을 위해서는 전문가의 조언을 구하고 최신 이민 정책 및 규정에 대한 최신 정보를 얻는 것이 중요합니다.

321214: Small Engine Mechanic

ILAOccupation in Industry Labour Agreement (ILA)DAMAThis occupation is eligible for DAMAShortage / 2023 Skills Priority List:
Current Demand / Future Demand
Skill Level  3  Assessing Authority  N/AEligible for
Skills Assessment Pilots
N/AMinimum points Last invitation Round 25/05/2023 (Subclass 189):
No invitations were given

State/Territory Eligibility Summary Table

State/Territory NominationVisa Subclass 190  Visa Subclass 491  
ACTAustralian Capital Territory  
NSWNew South Wales  
NTNorthern Territory (NT Residents & Graduates)  
NTNorthern Territory (Offshore: Priority Occupation)  
QLDQueensland (Living in QLD)  
QLDQueensland (Offshore)  
SASouth Australia (Graduates)  
SASouth Australia (Working in SA)  
SASouth Australia (Highly Skilled & Talented)  
SASouth Australia (Offshore)  
TASTasmanian Skilled Employment  
TASTasmanian Skilled Graduate  
TASTasmanian Established Resident  
TASTasmanian Business Operator  
TASOverseas Applicant (Job Offer)  
TASOverseas Applicant (OSOP) – Invitation Only  
VICVictoria  
WAWestern Australia - WASMOL Schedule 1  
WAWestern Australia - WASMOL Schedule 2  
WAWestern Australia - Graduate  
  • Occupation is IN the State/Territory Skilled Occupation List and MAY be eligible if you meet the specific State/Territory nomination requirements
  • Occupation is IN the Skilled List (MLTSSL, STSOL or ROL list) and MAY be eligible if you meet the State/Territory nomination requirements
  • Occupation MAY NOT be eligible
  • Stream NOT applicable to the visa Subclass
  • Migration Program currently CLOSED

State/Territory Eligibility Details

Australian Capital Territory

ACT Critical Skills List

321214: Small Engine Mechanic
Subclass 190Subclass 491Nomination places available per month
10 or Less

Last list update: 16 May 2023

General Requirements

Candidates must register their interest in ACT nomination by completing a score-based Canberra Matrix
Candidates may be nominated under four streams:

  • Canberra Residents
  • Overseas Applicants
  • Doctorate Streamlined nomination
  • Significant economic benefit

Requirements for Canberra Residents

Candidates applying for Subclass 190 nomination must:

  • Have an occupation on the ACT Critical Skills List; or be the primary holder of a 457/482 visa sponsored by an ACT employer for the last 6 months; or be the majority owner of an eligible ACT business claiming Matrix points in the Small Business Owner category.
  • Have lived in Canberra for the last 6 months and continue until invitation.
  • Have worked in Canberra for at least 26 weeks (overall hourly and/or earnings requirements apply).
  • Have ‘Proficient’ or ‘Superior’ English (ANZSCO 351311 Chef, and ANZSCO skill level 3 to 5 are exempt).

Candidates applying for Subclass 491 nomination must:

  • Have an occupation on the ACT Critical Skills List; or be the primary holder of a 457/482 visa sponsored by an ACT employer for the last 3 months; or be the majority owner of an eligible ACT business claiming Matrix points in the Small Business Owner category.
  • Have lived in Canberra for the last 3 months and continue until invitation.
  • Have worked in Canberra for at least 13 weeks (overall hourly and/or earnings requirements apply).
  • Have ‘Competent’ English.

Requirements for Overseas Applicants

Candidates applying for Subclass 190 nomination must:

  • Have an occupation on the ACT Critical Skills List.
  • Have at least three years full time, post graduate relevant work experience in your nominated occupation in the last five years.
  • Have researched the ACT labour market and be satisfied with being employable in Canberra.
  • Have ‘Proficient’ or ‘Superior’ English (ANZSCO 351311 Chef, and ANZSCO skill level 3 to 5 are exempt).
  • Be living overseas and have not lived in Australia for the last 12 months.
  • Have access to sufficient settlement funds.

Candidates applying for Subclass 491 nomination must:

  • Have an occupation on the ACT Critical Skills List.
  • Have at least one year full time, post graduate relevant work experience in your nominated occupation in the last five years.
  • Have researched the ACT labour market and be satisfied with being employable in Canberra.
  • Have ‘Competent’ English.
  • Be living overseas and have not lived in Australia for the last 12 months.
  • Have access to sufficient settlement funds.

Doctorate Streamlined nomination

Candidates must:

  • Have lived in Canberra for the last 12 months (interstate and overseas residents may be eligible if they completed their doctoral degree from an ACT within the last two years).
  • Have completed a professional or research doctoral degree at an ACT university.

Significant economic benefit

  • Invitation can ONLY be initiated by the ACT government.

New South Wales

Subclass 190 Basic Eligibility criteria

  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Candidates must be currently residing in NSW or Offshore and have continuously done so for a minimum of 6 months.
  • Have submitted an EOI seeking Subclass 190 nomination for NSW only

NSW Target Sectors

To more effectively respond to changing skills shortages across the state, NSW is transitioning from the publication of an eligible ANZSCO skilled list to adopting a sector-focused approach.

The sectors identified as experiencing critical skills shortages in NSW include:

  • Health
  • Education
  • Information and Communication Technology (ICT)
  • Infrastructure
  • Agriculture

Important: Although NSW prioritizes target sectors, high-ranking EOIs submitted in non-priority sectors may also be considered. However, it's important to understand that the chances of receiving an invitation are exceptionally low due to high demand and limited spots.

Subclass 491 Basic Eligibility criteria

The details below are for the 2022-23 Skilled Work Regional visa (subclass 491) program year. Information regarding the eligibility criteria and application process for NSW nomination in the 2023-24 program year will be available soon.

Candidates may be nominated under two pathways:

  • Pathway 1 – Apply directly to an RDA office (see participating regions below).
    • Stream A - Established work history with a regional NSW-based employer
    • Stream B - My skills are required in regional NSW
  • Pathway 2 – Be invited by Investment NSW.

Requirements for Pathway 1 - Stream A

  • Candidates must have an eligible occupation.
  • Candidates must be currently living and working in a designated regional area of NSW and have continuously done so for the past 12 months.
  • The qualifying employment must be in the nominated (or closely related) occupation, with the same employer, deemed skilled by NSW and paid a minimum of $53,900 (pro-rated if under 38 hours/week).

Requirements for Pathway 1 - Stream B

  • Candidates must have an eligible occupation within an ANZSCO on the NSW Skills Lists (Pathway 1 - Stream B).
  • Candidates must be currently residing in NSW or Offshore and have continuously done so for a minimum of 3 months.

Requirements for Pathway 2

  • Candidates must have an eligible occupation within an ANZSCO on the NSW Skills Lists (Pathway 2)
  • Candidates must be currently residing in NSW or Offshore and have continuously done so for a minimum of 3 months.

Participating regions for Pathway 1 are:

The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

Northern Territory

Due to insufficient nomination allocations provided by the Australian Government for the current program year (2023-24), the NT Government is unable to accept new subclass 190 nomination applications at present. Those who meet relevant criteria will be offered a subclass 491 nomination. Read more

General Requirements

Candidates may be nominated under three streams/pathways:

Requirements for NT Residents

Candidates must:

  • Have been residing in the NT for at least 12 consecutive months, with no migrating dependants residing in another part of Australia.
  • Demonstrate full-time employment in the NT in an eligible occupation (i.e., nominated occupation or related to it) for at least 6 consecutive months immediately before applying (the employment must be available for at least 12 months). If the occupation is not “an eligible occupation”, a candidate may exceptionally still be considered if employed in health, aged or disabled care, education (incl. childcare), and hospitality.
  • Demonstrate that the position is based in the NT (serviced office spaced or hot desking generally not accepted) and the employer has been training for at least 12 months in the NT.

Requirements for Offshore Applicants

Candidates must:

  • Have post-qualification work experience of at least 1 year in the nominated occupation (additional work experience may be required under the priority occupations stream).
  • Demonstrate a genuine commitment to live and work in NT.
  • Provide evidence of financial capacity.
  • Meet the criteria relevant to one of the 3 streams:

  • Priority occupation stream

    • Have an occupation on the Northern Territory Offshore Migration Occupation List (NTOMOL).
    • Meet any additional work experience required as specified on the NTOMOL. Please, see below:

    NT Offshore Migration Occupations List (NTOMOL)

    321214: Small Engine Mechanic
    Subclass 190Subclass 491Comments
    NN

    NT Family stream

    • Have an eligible family member in the NT who is a usual resident and has lived in the NT for at least 12 months. This person must be an Australian citizen, a permanent resident, or an Eligible New Zealand citizen or hold an eligible visa (Subclass 491, 494, 489 or a bridging visa associated with an application for a Subclass 887 or 191 visa). The eligible relative must confirm their willingness to provide settlement support.
    • Demonstrate genuine and sustained efforts to obtain employment from an NT employer.

    NT Job Offer stream

    • Have a job offer in the nominated occupation in an NT business that has been actively operating in the NT for at least 12 months.

NT Graduates

Candidates must:

  • Have completed two years of study in the NT.
  • Have completed one or more qualifications at an NT-based institution in a single tertiary course or a set of nested tertiary courses.
  • Demonstrate genuine and sustained efforts to obtain employment from an NT employer in the nominated occupation.

Candidates who:

  • hold a Graduate (Subclass 485) visa that expires after 1 July 2024 or who are eligible to apply for a Graduate (Subclass 485) visa, are unlikely to be offered a nomination in this program year.
  • are working in their nominated occupations or in critical sectors (healthcare, education and hospitality) would be prioritised.
The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

Queensland

2023-24 Queensland Skilled Migration Program

321214: Small Engine Mechanic
TypeSubclass 190Subclass 491Minimum post-qualification work experience requirement
Offshore candidates (QSOL list)Three years
Living in QLD (Skilled List)

Last list update (QSOL List): 19 September 2023

General Requirements

Candidates may be nominated under four streams:

Requirements for 'Skilled workers living in QLD'

Candidates must:

  • Have a points-test result of 75 or higher for Subclass 190 (except for Trades occupations, which require 70 or higher) or, 65 or higher for Subclass 491.
  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Have Competent English or higher (6.0 on IELTS / 50 on PTE).
  • Have been living in QLD (regional for Subclass 491), undertaking full-time post-qualification employment (30 hrs/week) in the nominated occupation for ‘3 months immediately before EOI lodgement’ for Subclass 190 or, ‘at the time of your EOI lodgement’ for Subclass 491.
  • Provide evidence of ongoing full-time employment in QLD for a further 12 months for Subclass 190 or, 6 months for Subclass 491 (virtual office is not accepted).

Skilled workers living in QLD

Requirements for 'Skilled workers living Offshore'

Candidates must:

  • Have a points-test result of 75 or higher for Subclass 190 (except for Trades occupations, which require 70 or higher) or, 65 or higher for Subclass 491.
  • Have an eligible occupation on the ‘Queensland Skilled Occupation List’ (QSOL).
  • Have Competent English or higher (6.0 on IELTS / 50 on PTE).
  • Provide evidence of the required years of post-study work experience as per the QSOL and be employed in the nominated occupation when invited.

Skilled workers living Offshore

Requirements for 'Graduates of a QLD university'

Candidates must:

  • Have a points-test result of 75 or higher for Subclass 190 or, 65 or higher for Subclass 491.
  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Be living in Queensland (regional for Subclass 491).
  • Have Competent English or higher (6.0 on IELTS / 50 PTE).
  • Have completed 100% of their studies in Queensland and graduated in the last two years.
  • Meet the additional criteria for their qualification level as indicated below.

PhD or Doctorate Graduates (190 and 491) must:

  • Have had a positive decision on their thesis.

Master’s Graduates in STEM or Agriculture fields (190 and 491) must:

  • Be employed full-time (30 hrs/week) in the nominated occupation (or ANZSCO Skill Level 1).

Master’s Graduates - not in STEM or Agriculture fields (190 and 491) must:

  • Be employed full-time (30 hrs/week) in the nominated occupation (or ANZSCO Skill Level 1).
  • Have a grade point average of 6.0 or higher for Subclass 190 or 5.0 for Subclass 491.

Bachelor’s Graduates (190 and 491) must:

  • Be employed full-time (30 hrs/week) in the nominated occupation (or ANZSCO Skill Level 1).
  • Have a grade point average of 6.0 or higher for Subclass 190 or 5.0 for Subclass 491.

Graduates of a QLD University

Requirements for 'Small business owners in regional QLD'

Candidates must:

  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Have full-time work rights and not currently be studying.
  • Be living in regional Queensland.
  • Be working for the business full-time (30 hrs/week)
  • Have 100% ownership of the business.
  • Own and operate a business in regional Queensland.
  • Meet the criteria for Pathway 1 or Pathway 2 as indicated below.

Pathway 1

  • Have purchased an existing business for a minimum of $100,000.
  • The business must be a pre-existing business (operating for a minimum of 2 years) trading for a minimum of six months prior to lodging an Expression of Interest (EOI).
  • The business must employ at least one Australian resident (20 hrs/week) or two employees working 10 hrs/week.

Pathway 2

  • Have started a business and have continuously run that business for a minimum of two years. Must be generating a profit and have a turnover of $200,000 in the 12 months prior to application.

Small Business Owners in regional QLD

The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

South Australia

2023-24 South Australia's Skilled Occupation List

321214: Small Engine Mechanic
StreamApplying FromSubclass 190Subclass 491Minimum Points
GraduatesSouth AustraliaYY65
Working in South AustraliaSouth AustraliaYY65
Highly Skilled & TalentedAny LocationYY65
OffshoreOffshoreNY65

Last list update: 29 September 2023

For further details access directly the South Australia's Skilled Occupation List.

General Requirements

To be selected to apply for State nomination, most candidates must complete and submit a Registration of Interest (ROI) for South Australia via their Migration portal.

Candidates may be nominated under four streams:

Requirements for 'South Australian Graduates'

Candidates must:

  • Have an occupation under the Graduate stream on South Australia’s Skilled Occupation list.
  • Currently live and work in South Australia.
  • Have at least Competent English.
  • Have completed their qualification at a South Australian education. The course must be CRICOS registered with a minimum of 46 CRICOS weeks and meet the minimum qualification level listed for the occupation on South Australia’s Skilled Occupation list. At least 50% of the qualification must have been completed in SA, and the candidate must have resided in the State for at least 1 year during their studies.
  • Have been residing in South Australia for at least the last 12 months.
  • Have been working for the last 6 months and be currently employed (at least 30 hr/week). Employment must be related to the nominated occupation.

South Australian Graduates

Requirements for 'Working in South Australia'

Candidates must:

  • Have an occupation under the Working in SA stream on South Australia’s Skilled Occupation list.
  • Currently live and work in South Australia.
  • Have at least Competent English.
  • Have been residing in South Australia for at least the last 12 months.
  • Have been working for the last 6 months and be currently employed (at least 30 hr/week). Employment must be related to the nominated occupation.

Working in South Australia

Requirements for 'Highly Skilled and Talented'

Candidates must:

  • Currently live and work in South Australia, interstate or overseas.
  • Have at least Competent English.
  • Meet employment requirements if working or have been offered a position in South Australia. Employer requirements include an existing business of at least 12 months, located and operating in SA for the past 12 months and with an annual turnover of at least $4 million unless an exception applies.
  • Meet additional requirements if:
    • Candidate with Hi-Tech or Digital industry experience, including at least 2 years of experience in one of South Australia’s critical technology professions.
    • Candidate with Defence or Space industry experience, including having already commenced employment in a relevant organisation and currently working full-time in South Australia. Overseas candidates must demonstrate relevant experience and intend to relocate to South Australia.

Highly Skilled and Talented

Requirements for 'Offshore'

Candidates must:

  • Currently residing offshore.

Offshore

Tasmania

321214: Small Engine Mechanic
Occupation Lists EligibilityNotes & caveats
Critical Roles List
Tasmanian Onshore Skilled Occupation List (TOSOL)Employer must have operated in Tasmania for at least three years
Overseas Skilled Occupation Profiles (OSOP)

Lists

  • Critical Roles List: An occupation included in the 'Critical Roles List' will be prioritised in the Migration Tasmania Gateway.
  • Tasmanian Onshore Skilled Occupation List (TOSOL): An occupation included in the TOSOL is eligible for subclass 190 nomination after 6 months employment in a closely related role. Occupations that are not on the TOSOL are eligible for subclass 190 nomination in the 'Tasmanian Skilled Employment' pathway after 15 months of related employment.
  • Overseas Skilled Occupation Profiles (OSOP): An occupation included in the OSOP list is eligible for the 'Overseas Applicant (OSOP) – Invitation Only' pathway (subclass 491 only).

Pathway Eligibility

321214: Small Engine Mechanic
PathwaySubclass 190Subclass 491
Tasmanian Skilled Employment
Tasmanian Skilled Graduate
Tasmanian Established Resident
Tasmanian Business Operator
Overseas Applicant (Job Offer)
Overseas Applicant (OSOP) – Invitation Only
  • Occupation is IN the state occupation list and MAY be eligible if you meet the specific state nomination requirements
  • Occupation is IN the Skilled List and MAY be eligible if you meet the state nomination requirements
  • Occupation MAY NOT be eligible
  • Stream NOT applicable to the visa Subclass

Victoria

Victoria’s 2023-24 Skilled Visa Nomination Program

To be selected to apply for Victorian skilled visa nomination, candidates must complete and submit a Registration of Interest (ROI) for Victorian State Visa Nomination.

All occupations included in the Skilled List(MLTSSL, STSOL or ROL list) are eligible for nomination if the candidate meets the Victoria nomination criteria.

The following occupation groups are prioritised:

  • Health
  • Social services
  • Information Communication Technology (ICT)
  • Early childhood, primary, secondary, and special education teachers
  • Advanced manufacturing
  • Infrastructure
  • Renewable energy
  • Hospitality and tourism (491 visa only)

General Requirements for 'Skilled Nominated visa (subclass 190)'

Candidates applying for Subclass 190 nomination must:

  • Have an occupation on the Skilled List (MLTSSL, STSOL or ROL list).
  • Have had their Registration of Interest (ROI) selected.
  • If onshore, be living in Victoria at the time of nomination.
  • If onshore and claiming earnings from skilled employment in the ROI, the employer must be physically located in Victoria.
  • Be committed to living in Victoria.

General Requirements for 'Skilled Work Regional (Provisional) visa (subclass 491)'

Onshore Candidates must:

  • Have an occupation on the Skilled List (MLTSSL, STSOL or ROL list).
  • Have had their Registration of Interest (ROI) selected.
  • Be living and working in skilled employment in regional Victoria at the time of nomination. Candidates who are not working, or working in non-skilled employment, are not eligible to apply for nomination.
  • Be committed to living in regional Victoria.

Offshore Candidates must:

  • Have an occupation on the Skilled List (MLTSSL, STSOL or ROL list). Offshore candidates for 491 visas with skills in healthcare, social services and education will be prioritised.
  • Have had their Registration of Interest (ROI) selected.
  • Be committed to living in regional Victoria.

Western Australia

Western Australia occupation lists (WASMOL Schedule 1 & 2, and Graduate)

321214: Small Engine Mechanic
Stream TypeStatusSubclass
190
Subclass
491
Minimum PointsPriority OccupationComments
General - WASMOL Schedule 2 AvailableYY65Applicants who have a nominated occupation may be eligible for Western Australian State nomination if they can also meet the relevant stream requirements.

Last list update: 25 October 2023

Candidates residing in Western Australia and/or candidates with a Priority Occupation will be given first priority.

General Requirements

Candidates may be nominated under two streams:

Applicants for the General stream must satisfy Schedule 1 or Schedule 2 criteria, depending on their occupation.

Schedule 1 criteria, candidates must have:

  • An occupation on the WASMOL – Schedule 1 (Health & Medical Occupations).
  • Competent English.
  • At least one year of relevant Australian or overseas work experience.
  • At least 6-months full-time contract of employment in Western Australia (only applicable for Subclass 190 visa applicants, and except for those invited through a WA building and construction industry sector occupation).

Schedule 2 criteria, candidates must have:

  • An occupation on the WASMOL – Schedule 2.
  • Competent English.
  • At least 6-months full-time contract of employment in Western Australia (only applicable for Subclass 190 visa applicants, and except for those invited through a WA building and construction industry sector occupation).

WA Graduates must have:

  • An occupation on the GOL.
  • Studied at an accredited Western Australian educational institution, full-time and face-to-face, for at least two years.
  • Completed a Cert. III or higher qualification in a Western Australian university, higher education provider, TAFE, registered training provider or English language provider.
  • Competent English.
The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

Migration Program Planning Levels 2023-24

State & Territory Visa Allocations 2023-24

State / TerritoryNominated Subclass 190Work Regional Subclass 491Business Innovation & Investment Program
(BIIP)
ACT6006000
NSW2,6501,5000
NT2504000
QLD9006500
SA1,1001,2000
TAS6006000
VIC2,7006000
WA1,5008500
TOTAL10,3006,4000

Skill stream

Visa CategoryAllocations 2022-23Allocations 2023-24
Employer Sponsored35,00036,825
Skilled Independent32,10030,375
Regional34,00032,300
State/Territory Nominated31,00030,400
Business Innovation & Investment5,0001,900
Global Talent (Independent)5,0005,000
Distinguished Talent300300
Total Skill stream142,400137,100

Family stream

Visa CategoryAllocations 2022-23Allocations 2023-24
Partner40,50040,500
Parent8,5008,500
Child3,0003,000
Other Family500500
Total Family stream52,50052,500
Special Eligibility100400
 
TOTAL Migration Program195,000190,000

2023-2024 Migration Program planning levels

ANZSCO version 1.3, cat. no. 1220.0
Major Group: 3 - Technicians and Trades Workers
Sub-Major Group: 32 - Automotive and Engineering Trades Workers
Minor Group: 321 - Automotive Electricians and Mechanics
Unit Group: 3212 - Motor Mechanics

Description

Maintains, tests and repairs engines of chainsaws, lawn mowers, garden tractors and other equipment with small engines. Registration or licensing may be required.

Alternative Titles

There are no Alternative Titles for this occupation

Specialisations

  • Chainsaw Mechanic
  • Lawnmower Mechanic
  • Outboard Motor Mechanic

Alternative titles are any commonly used alternative title (or titles) for the occupation. These alternative titles have the same meaning as the principal title but may be less commonly used.

Specialisation titles are any commonly used titles which refer to a subset of jobs belonging to the occupation designated in the principal title. These jobs involve the performance of specialised tasks rather than the broader range of tasks usually performed in the occupation.

2023 Skills Priority List

The Skills Priority List (SPL) provides a detailed view of occupations in shortage in Australian and by each state and territory. The SPL is released annually by Jobs and Skills Australia

Occupation Ratings: S Shortage; NS No Shortage; R Regional Shortage
National Future Demand:c Below economy average;b At economy average;a Above economy average

321214: Small Engine Mechanic
National Future DemandNationalACTNSWNTQLDSATASVICWA
cSSSSSSSSS

What is the Skills Priority List (SPL)?
Jobs and Skills Australia – Skills Shortages Analysis

Unit Group 3212: Motor Mechanics

Description

Repair, maintain and test motor vehicle and other internal combustion engines and related mechanical components. Motor Vehicle Parts and Accessories Fitters are excluded from this unit group. Motor Vehicle Parts and Accessories Fitters are included in Unit Group 8994 Motor Vehicle Parts and Accessories Fitters.

Indicative Skill Level  3

Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.

In Australia:

AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)

In New Zealand:
NZQF Level 4 qualification (ANZSCO Skill Level 3)

At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
Registration or licensing may be required.

Tasks

  • Detecting and diagnosing mechanical and electrical faults in engines and parts
  • Dismantling and removing engine assemblies, transmissions, steering mechanisms and other components, and checking parts
  • Repairing and replacing worn and defective parts and reassembling mechanical components, and referring to service manuals as needed
  • Performing scheduled maintenance services, such as oil changes, lubrications and engine tune-ups, to achieve smoother running of vehicles and ensure compliance with pollution regulations
  • Reassembling engines and parts after being repaired
  • Testing and adjusting mechanical parts after being repaired for proper performance
  • Diagnosing and testing parts with the assistance of computers
  • May inspect vehicles and issue roadworthiness certificates or detail work required to achieve roadworthiness
  • May respond to vehicle breakdown service calls

Occupations in this Unit Group

Average Salary 2021

Unit Group 3212: Motor Mechanics

TypeWeekly EarningsAnnual SalaryAverage Age
Males$ 1,276.80 $ 66,39436.6
Females$ 1,063.40 $ 55,29726.3
Persons$ 1,269.50 $ 66,01436.3

Complete list of Average Salary 2021 by occupation

Australian Bureau of Statistics, 2013, ANZSCO - Australian and New Zealand Standard Classification of Occupations, 2013, Version 1.3, cat. no. 1220.0, https://www.abs.gov.au/ausstats/abs@.nsf/mf/1220.0 

SkillSelect EOI Backlog

EOI Data Current to 30/09/2023

Total Count EOIs @ 30/09/2023

Visa TypeSubmittedInvitedLodged
188 Business Innovation3,2432,636
189 Skilled Independent123,92226021,018
190 State/Territory Nominated228,59277936,154
491 State/Territory Nominated (Regional)188,64658322,859
491 Family Sponsored4,536<20704

EOIs by Occupation & Visa Type

321214: Small Engine Mechanic

189 Skilled Independent

190 State/Territory Nominated

491 State/Territory Nominated

491 Family Sponsored

Notes

  • Counts of EOIs with less than 65 points are not shown.
  • Counts which are less than 20 are shown as '<20'.

EOI Status

SUBMITTED an EOI that meets all requirements for all selected visa subclasses and has all fields completed can be submitted. Once submitted, points are attributed to the EOI based on the information provided. Submitted EOIs are eligible for selection in an invitation round.

INVITED an invitation to apply for a visa has been issued.

LODGED a visa application has been lodged using an invitation to apply for a visa.

This data draws from the SkillSelect EOI Dashboard  and is thus as accurate as the information on that source. This information is intended to provide a general overview of the SkillSelect dataset in a specific point in time, rather than a real-time database.
Anzscosearch will provide this information as long as it remains available on the SkillSelect website.

DAMA - Designated Area Migration Agreement

Concessions
DAMA ListEnglishTSMITAgePR PathwaySkills & Experience
NTThe Northern Territory DAMA
up to 55
Category C
QLDThe TNQ (Townsville) DAMA
up to 55
Group 1
QLDFar North Queensland (FNQ DAMA 1.3)
up to 55
Group 1

Notes

  • English, TSMIT (Temporary Skilled Migration Income Threshold), Age, PR Pathway and Skills & Experience are concessions that may be available for this occupation under the relevant DAMA.
  • Skills & Experience requirements vary depending on whether the occupation is on a relevant skilled list as well as its skill level. Check the information available in the corresponding DAR website.
  • The table above literally reproduces the information published by the different Designated Area Representatives (DARs) in their DAMA Occupation lists. Concessions available (e.g PR pathway for applicants under NT DAMA) which have not been included by the DARs in relevant DAMA lists have also not been included above. Users should carefully review all information available in the DAR websites in relation to concessions.

Quick Contact


Interested in visiting,studying,working or living in Australia?

Enter your details and we'll call you back. When it suits you.


- 정보를 영어로 입력해주세요
귀하의 연령이 18세 미만인 경우 부모님이 이 양식을 작성해야 합니다.
+ Attach Your Resume (optional)