Operator ng Makinang Gumagawa ng Salamin (ANZSCO 711113)

Monday 13 November 2023

Ang tungkulin ng isang Glass Production Machine Operator (ANZSCO 711113) sa Australia ay upang patakbuhin ang mga makina na ginagamit sa paggawa at paghubog ng mga produktong salamin. Kasama sa trabahong ito ang iba't ibang gawain tulad ng pagsubaybay sa daloy ng mga hilaw na materyales, pagsasaayos ng mga setting ng makina, pag-set up at pag-install ng mga amag, pagpapatakbo ng mga makinang gumagawa ng salamin, at pag-inspeksyon ng mga natapos na produkto para sa kalidad.

Bagama't ang trabaho ng Glass Production Machine Operator ay kasalukuyang hindi kasama sa Skilled List (MLTSSL, STSOL, o ROL), mahalagang tandaan na ang pangangailangan para sa mga bihasang manggagawa sa larangang ito ay maaaring mag-iba sa paglipas ng panahon. Samakatuwid, dapat na regular na suriin ng mga indibidwal na interesadong lumipat sa Australia bilang Glass Production Machine Operator ang mga nauugnay na website ng Estado/Teritoryo para sa mga update sa pamantayan sa pagiging kwalipikado at mga opsyon sa visa.

Mga Opsyon sa Visa

Para sa mga indibidwal na gustong lumipat sa Australia bilang Glass Production Machine Operator, may ilang mga opsyon sa visa na dapat isaalang-alang:

Kategorya ng Visa Paglalarawan Skilled Independent Visa (Subclass 189) Ang visa na ito ay para sa mga skilled worker na hindi inisponsor ng isang employer, isang estado o teritoryo, o isang miyembro ng pamilya. Gayunpaman, maaaring hindi kwalipikado ang Glass Production Machine Operator para sa kategoryang ito ng visa. Skilled Nominated Visa (Subclass 190) Ang visa na ito ay para sa mga skilled worker na hinirang ng pamahalaan ng estado o teritoryo. Gayunpaman, ang Glass Production Machine Operator ay maaaring hindi karapat-dapat para sa nominasyon sa ilalim ng kategoryang ito ng visa. Skilled Work Regional Visa (Subclass 491) Ang visa na ito ay para sa mga skilled worker na nominado ng gobyerno ng estado o teritoryo o itinataguyod ng isang karapat-dapat na miyembro ng pamilya upang manirahan at magtrabaho sa rehiyonal na Australia. Gayunpaman, ang Glass Production Machine Operator ay maaaring hindi karapat-dapat para sa nominasyon sa ilalim ng kategoryang ito ng visa. Family Sponsored Visa (Subclass 491F) Ang visa na ito ay para sa mga skilled worker na itinataguyod ng isang karapat-dapat na miyembro ng pamilya upang manirahan at magtrabaho sa Australia. Gayunpaman, maaaring hindi kwalipikado ang Glass Production Machine Operator para sa kategoryang ito ng visa. Graduate Work Visa (Subclass 485) Ang visa na ito ay para sa mga internasyonal na mag-aaral na kamakailan lamang ay nagtapos na may karapat-dapat na kwalipikasyon mula sa isang institusyong pang-edukasyon sa Australia. Gayunpaman, maaaring hindi kwalipikado ang Glass Production Machine Operator para sa kategoryang ito ng visa.

Mahalagang tandaan na ang pagiging karapat-dapat para sa mga opsyon sa visa na ito ay maaaring mag-iba batay sa mga salik gaya ng pangangailangan sa trabaho, mga kinakailangan sa nominasyon ng estado/teritoryo, at mga instrumentong pambatas. Samakatuwid, ipinapayong kumonsulta sa mga opisyal na instrumento sa pambatasan at sa mga nauugnay na website ng estado/teritoryo para sa pinakabagong impormasyon sa mga opsyon sa visa at pamantayan sa pagiging kwalipikado.

Talahanayan ng Buod ng Kwalipikasyon ng Estado/Teritoryo

Ang bawat estado at teritoryo sa Australia ay may sariling mga kinakailangan sa nominasyon para sa mga bihasang manggagawa. Ang talahanayan ng buod ng pagiging karapat-dapat ay nagbibigay ng isang pangkalahatang-ideya ng mga subclass ng visa (190 at 491) at ang kaukulang pagiging karapat-dapat sa nominasyon ng estado/teritoryo:

Estado/Teritoryo Pagiging Kwalipikado sa Subclass 190 Pagiging Kwalipikado sa Subclass 491 Australian Capital Territory (ACT) Hindi karapat-dapat Hindi karapat-dapat New South Wales (NSW) Hindi karapat-dapat Hindi karapat-dapat Northern Territory (NT) Hindi karapat-dapat Hindi karapat-dapat Queensland (QLD) Hindi karapat-dapat Hindi karapat-dapat South Australia (SA) Hindi karapat-dapat Hindi karapat-dapat Tasmania (TAS) Hindi karapat-dapat Hindi karapat-dapat Victoria (VIC) Hindi karapat-dapat Hindi karapat-dapat Western Australia (WA) Hindi karapat-dapat Hindi karapat-dapat

Mahalagang tandaan na ang impormasyong ibinigay sa talahanayan ng buod ng pagiging karapat-dapat ng estado/teritoryo ay batay sa kasalukuyang impormasyong magagamit at maaaring magbago. Samakatuwid, ipinapayong regular na suriin ang mga opisyal na website ng estado/teritoryo para sa pinakabagong impormasyon sa mga kinakailangan sa pagiging kwalipikado.

Konklusyon

Sa konklusyon, ang trabaho ng Glass Production Machine Operator (ANZSCO 711113) ay maaaring hindi karapat-dapat para sa nominasyon sa ilalim ng ilang partikular na kategorya ng visa sa Australia. Mahalaga para sa mga indibidwal na interesado sa trabahong ito na regular na suriin ang mga opisyal na instrumento sa pambatasan at ang mga nauugnay na website ng estado/teritoryo para sa mga update sa pamantayan sa pagiging kwalipikado at mga opsyon sa visa. Ang impormasyong ibinigay ditoAng artikulo ay isang pangkalahatang pangkalahatang-ideya at hindi dapat ituring bilang opisyal na payo sa imigrasyon.

711113: Glass Production Machine Operator

No Shortage / 2023 Skills Priority List:
Current Demand / Future Demand
Skill Level  4  Assessing Authority  N/AN/AMinimum points Last invitation Round 25/05/2023 (Subclass 189):
No invitations were given

State/Territory Eligibility Summary Table

State/Territory NominationVisa Subclass 190  Visa Subclass 491  
ACTAustralian Capital Territory  
NSWNew South Wales  
NTNorthern Territory (NT Residents & Graduates)  
NTNorthern Territory (Offshore: Priority Occupation)  
QLDQueensland (Living in QLD)  
QLDQueensland (Offshore)  
SASouth Australia (Graduates)  
SASouth Australia (Working in SA)  
SASouth Australia (Highly Skilled & Talented)  
SASouth Australia (Offshore)  
TASTasmanian Skilled Employment  
TASTasmanian Skilled Graduate  
TASTasmanian Established Resident  
TASTasmanian Business Operator  
TASOverseas Applicant (Job Offer)  
TASOverseas Applicant (OSOP) – Invitation Only  
VICVictoria  
WAWestern Australia - WASMOL Schedule 1  
WAWestern Australia - WASMOL Schedule 2  
WAWestern Australia - Graduate  
  • Occupation is IN the State/Territory Skilled Occupation List and MAY be eligible if you meet the specific State/Territory nomination requirements
  • Occupation is IN the Skilled List (MLTSSL, STSOL or ROL list) and MAY be eligible if you meet the State/Territory nomination requirements
  • Occupation MAY NOT be eligible
  • Stream NOT applicable to the visa Subclass
  • Migration Program currently CLOSED

State/Territory Eligibility Details

Australian Capital Territory

ACT Critical Skills List

711113: Glass Production Machine Operator
Subclass 190Subclass 491Nomination places available per month

General Requirements

Candidates must register their interest in ACT nomination by completing a score-based Canberra Matrix
Candidates may be nominated under four streams:

  • Canberra Residents
  • Overseas Applicants
  • Doctorate Streamlined nomination
  • Significant economic benefit

Requirements for Canberra Residents

Candidates applying for Subclass 190 nomination must:

  • Have an occupation on the ACT Critical Skills List; or be the primary holder of a 457/482 visa sponsored by an ACT employer for the last 6 months; or be the majority owner of an eligible ACT business claiming Matrix points in the Small Business Owner category.
  • Have lived in Canberra for the last 6 months and continue until invitation.
  • Have worked in Canberra for at least 26 weeks (overall hourly and/or earnings requirements apply).
  • Have ‘Proficient’ or ‘Superior’ English (ANZSCO 351311 Chef, and ANZSCO skill level 3 to 5 are exempt).

Candidates applying for Subclass 491 nomination must:

  • Have an occupation on the ACT Critical Skills List; or be the primary holder of a 457/482 visa sponsored by an ACT employer for the last 3 months; or be the majority owner of an eligible ACT business claiming Matrix points in the Small Business Owner category.
  • Have lived in Canberra for the last 3 months and continue until invitation.
  • Have worked in Canberra for at least 13 weeks (overall hourly and/or earnings requirements apply).
  • Have ‘Competent’ English.

Requirements for Overseas Applicants

Candidates applying for Subclass 190 nomination must:

  • Have an occupation on the ACT Critical Skills List.
  • Have at least three years full time, post graduate relevant work experience in your nominated occupation in the last five years.
  • Have researched the ACT labour market and be satisfied with being employable in Canberra.
  • Have ‘Proficient’ or ‘Superior’ English (ANZSCO 351311 Chef, and ANZSCO skill level 3 to 5 are exempt).
  • Be living overseas and have not lived in Australia for the last 12 months.
  • Have access to sufficient settlement funds.

Candidates applying for Subclass 491 nomination must:

  • Have an occupation on the ACT Critical Skills List.
  • Have at least one year full time, post graduate relevant work experience in your nominated occupation in the last five years.
  • Have researched the ACT labour market and be satisfied with being employable in Canberra.
  • Have ‘Competent’ English.
  • Be living overseas and have not lived in Australia for the last 12 months.
  • Have access to sufficient settlement funds.

Doctorate Streamlined nomination

Candidates must:

  • Have lived in Canberra for the last 12 months (interstate and overseas residents may be eligible if they completed their doctoral degree from an ACT within the last two years).
  • Have completed a professional or research doctoral degree at an ACT university.

Significant economic benefit

  • Invitation can ONLY be initiated by the ACT government.

New South Wales

This occupation is NOT included in the Skilled List (MLTSSL, STSOL and ROL) and may not be eligible for nomination.

Subclass 190 Basic Eligibility criteria

  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Candidates must be currently residing in NSW or Offshore and have continuously done so for a minimum of 6 months.
  • Have submitted an EOI seeking Subclass 190 nomination for NSW only

NSW Target Sectors

To more effectively respond to changing skills shortages across the state, NSW is transitioning from the publication of an eligible ANZSCO skilled list to adopting a sector-focused approach.

The sectors identified as experiencing critical skills shortages in NSW include:

  • Health
  • Education
  • Information and Communication Technology (ICT)
  • Infrastructure
  • Agriculture

Important: Although NSW prioritizes target sectors, high-ranking EOIs submitted in non-priority sectors may also be considered. However, it's important to understand that the chances of receiving an invitation are exceptionally low due to high demand and limited spots.

Subclass 491 Basic Eligibility criteria

The details below are for the 2022-23 Skilled Work Regional visa (subclass 491) program year. Information regarding the eligibility criteria and application process for NSW nomination in the 2023-24 program year will be available soon.

Candidates may be nominated under two pathways:

  • Pathway 1 – Apply directly to an RDA office (see participating regions below).
    • Stream A - Established work history with a regional NSW-based employer
    • Stream B - My skills are required in regional NSW
  • Pathway 2 – Be invited by Investment NSW.

Requirements for Pathway 1 - Stream A

  • Candidates must have an eligible occupation.
  • Candidates must be currently living and working in a designated regional area of NSW and have continuously done so for the past 12 months.
  • The qualifying employment must be in the nominated (or closely related) occupation, with the same employer, deemed skilled by NSW and paid a minimum of $53,900 (pro-rated if under 38 hours/week).

Requirements for Pathway 1 - Stream B

  • Candidates must have an eligible occupation within an ANZSCO on the NSW Skills Lists (Pathway 1 - Stream B).
  • Candidates must be currently residing in NSW or Offshore and have continuously done so for a minimum of 3 months.

Requirements for Pathway 2

  • Candidates must have an eligible occupation within an ANZSCO on the NSW Skills Lists (Pathway 2)
  • Candidates must be currently residing in NSW or Offshore and have continuously done so for a minimum of 3 months.

Participating regions for Pathway 1 are:

The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

Northern Territory

Due to insufficient nomination allocations provided by the Australian Government for the current program year (2023-24), the NT Government is unable to accept new subclass 190 nomination applications at present. Those who meet relevant criteria will be offered a subclass 491 nomination. Read more
This occupation is NOT included in the Skilled List (MLTSSL, STSOL and ROL) and may not be eligible for nomination.

General Requirements

Candidates may be nominated under three streams/pathways:

Requirements for NT Residents

Candidates must:

  • Have been residing in the NT for at least 12 consecutive months, with no migrating dependants residing in another part of Australia.
  • Demonstrate full-time employment in the NT in an eligible occupation (i.e., nominated occupation or related to it) for at least 6 consecutive months immediately before applying (the employment must be available for at least 12 months). If the occupation is not “an eligible occupation”, a candidate may exceptionally still be considered if employed in health, aged or disabled care, education (incl. childcare), and hospitality.
  • Demonstrate that the position is based in the NT (serviced office spaced or hot desking generally not accepted) and the employer has been training for at least 12 months in the NT.

Requirements for Offshore Applicants

Candidates must:

  • Have post-qualification work experience of at least 1 year in the nominated occupation (additional work experience may be required under the priority occupations stream).
  • Demonstrate a genuine commitment to live and work in NT.
  • Provide evidence of financial capacity.
  • Meet the criteria relevant to one of the 3 streams:

  • Priority occupation stream

    • Have an occupation on the Northern Territory Offshore Migration Occupation List (NTOMOL).
    • Meet any additional work experience required as specified on the NTOMOL. Please, see below:

    NT Offshore Migration Occupations List (NTOMOL)

    711113: Glass Production Machine Operator
    Subclass 190Subclass 491Comments
    NN

    NT Family stream

    • Have an eligible family member in the NT who is a usual resident and has lived in the NT for at least 12 months. This person must be an Australian citizen, a permanent resident, or an Eligible New Zealand citizen or hold an eligible visa (Subclass 491, 494, 489 or a bridging visa associated with an application for a Subclass 887 or 191 visa). The eligible relative must confirm their willingness to provide settlement support.
    • Demonstrate genuine and sustained efforts to obtain employment from an NT employer.

    NT Job Offer stream

    • Have a job offer in the nominated occupation in an NT business that has been actively operating in the NT for at least 12 months.

NT Graduates

Candidates must:

  • Have completed two years of study in the NT.
  • Have completed one or more qualifications at an NT-based institution in a single tertiary course or a set of nested tertiary courses.
  • Demonstrate genuine and sustained efforts to obtain employment from an NT employer in the nominated occupation.

Candidates who:

  • hold a Graduate (Subclass 485) visa that expires after 1 July 2024 or who are eligible to apply for a Graduate (Subclass 485) visa, are unlikely to be offered a nomination in this program year.
  • are working in their nominated occupations or in critical sectors (healthcare, education and hospitality) would be prioritised.
The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

Queensland

2023-24 Queensland Skilled Migration Program

711113: Glass Production Machine Operator
TypeSubclass 190Subclass 491Minimum post-qualification work experience requirement
Offshore candidates (QSOL list)
Living in QLD (Skilled List)

General Requirements

Candidates may be nominated under four streams:

Requirements for 'Skilled workers living in QLD'

Candidates must:

  • Have a points-test result of 75 or higher for Subclass 190 (except for Trades occupations, which require 70 or higher) or, 65 or higher for Subclass 491.
  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Have Competent English or higher (6.0 on IELTS / 50 on PTE).
  • Have been living in QLD (regional for Subclass 491), undertaking full-time post-qualification employment (30 hrs/week) in the nominated occupation for ‘3 months immediately before EOI lodgement’ for Subclass 190 or, ‘at the time of your EOI lodgement’ for Subclass 491.
  • Provide evidence of ongoing full-time employment in QLD for a further 12 months for Subclass 190 or, 6 months for Subclass 491 (virtual office is not accepted).

Skilled workers living in QLD

Requirements for 'Skilled workers living Offshore'

Candidates must:

  • Have a points-test result of 75 or higher for Subclass 190 (except for Trades occupations, which require 70 or higher) or, 65 or higher for Subclass 491.
  • Have an eligible occupation on the ‘Queensland Skilled Occupation List’ (QSOL).
  • Have Competent English or higher (6.0 on IELTS / 50 on PTE).
  • Provide evidence of the required years of post-study work experience as per the QSOL and be employed in the nominated occupation when invited.

Skilled workers living Offshore

Requirements for 'Graduates of a QLD university'

Candidates must:

  • Have a points-test result of 75 or higher for Subclass 190 or, 65 or higher for Subclass 491.
  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Be living in Queensland (regional for Subclass 491).
  • Have Competent English or higher (6.0 on IELTS / 50 PTE).
  • Have completed 100% of their studies in Queensland and graduated in the last two years.
  • Meet the additional criteria for their qualification level as indicated below.

PhD or Doctorate Graduates (190 and 491) must:

  • Have had a positive decision on their thesis.

Master’s Graduates in STEM or Agriculture fields (190 and 491) must:

  • Be employed full-time (30 hrs/week) in the nominated occupation (or ANZSCO Skill Level 1).

Master’s Graduates - not in STEM or Agriculture fields (190 and 491) must:

  • Be employed full-time (30 hrs/week) in the nominated occupation (or ANZSCO Skill Level 1).
  • Have a grade point average of 6.0 or higher for Subclass 190 or 5.0 for Subclass 491.

Bachelor’s Graduates (190 and 491) must:

  • Be employed full-time (30 hrs/week) in the nominated occupation (or ANZSCO Skill Level 1).
  • Have a grade point average of 6.0 or higher for Subclass 190 or 5.0 for Subclass 491.

Graduates of a QLD University

Requirements for 'Small business owners in regional QLD'

Candidates must:

  • Have an occupation on the Department’s relevant Skilled List (MLTSSL, STSOL or ROL).
  • Have full-time work rights and not currently be studying.
  • Be living in regional Queensland.
  • Be working for the business full-time (30 hrs/week)
  • Have 100% ownership of the business.
  • Own and operate a business in regional Queensland.
  • Meet the criteria for Pathway 1 or Pathway 2 as indicated below.

Pathway 1

  • Have purchased an existing business for a minimum of $100,000.
  • The business must be a pre-existing business (operating for a minimum of 2 years) trading for a minimum of six months prior to lodging an Expression of Interest (EOI).
  • The business must employ at least one Australian resident (20 hrs/week) or two employees working 10 hrs/week.

Pathway 2

  • Have started a business and have continuously run that business for a minimum of two years. Must be generating a profit and have a turnover of $200,000 in the 12 months prior to application.

Small Business Owners in regional QLD

The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

South Australia

711113: Glass Production Machine Operator

2023-24 South Australia's Skilled Occupation List

StreamSubclass 190Subclass 491Minimum Points
GraduatesNN
Working in South AustraliaNN
Highly Skilled & TalentedNN
OffshoreNN

General Requirements

To be selected to apply for State nomination, most candidates must complete and submit a Registration of Interest (ROI) for South Australia via their Migration portal.

Candidates may be nominated under four streams:

Requirements for 'South Australian Graduates'

Candidates must:

  • Have an occupation under the Graduate stream on South Australia’s Skilled Occupation list.
  • Currently live and work in South Australia.
  • Have at least Competent English.
  • Have completed their qualification at a South Australian education. The course must be CRICOS registered with a minimum of 46 CRICOS weeks and meet the minimum qualification level listed for the occupation on South Australia’s Skilled Occupation list. At least 50% of the qualification must have been completed in SA, and the candidate must have resided in the State for at least 1 year during their studies.
  • Have been residing in South Australia for at least the last 12 months.
  • Have been working for the last 6 months and be currently employed (at least 30 hr/week). Employment must be related to the nominated occupation.

South Australian Graduates

Requirements for 'Working in South Australia'

Candidates must:

  • Have an occupation under the Working in SA stream on South Australia’s Skilled Occupation list.
  • Currently live and work in South Australia.
  • Have at least Competent English.
  • Have been residing in South Australia for at least the last 12 months.
  • Have been working for the last 6 months and be currently employed (at least 30 hr/week). Employment must be related to the nominated occupation.

Working in South Australia

Requirements for 'Highly Skilled and Talented'

Candidates must:

  • Currently live and work in South Australia, interstate or overseas.
  • Have at least Competent English.
  • Meet employment requirements if working or have been offered a position in South Australia. Employer requirements include an existing business of at least 12 months, located and operating in SA for the past 12 months and with an annual turnover of at least $4 million unless an exception applies.
  • Meet additional requirements if:
    • Candidate with Hi-Tech or Digital industry experience, including at least 2 years of experience in one of South Australia’s critical technology professions.
    • Candidate with Defence or Space industry experience, including having already commenced employment in a relevant organisation and currently working full-time in South Australia. Overseas candidates must demonstrate relevant experience and intend to relocate to South Australia.

Highly Skilled and Talented

Requirements for 'Offshore'

Candidates must:

  • Currently residing offshore.

Offshore

Tasmania

711113: Glass Production Machine Operator
Occupation Lists EligibilityNotes & caveats
Critical Roles List
Tasmanian Onshore Skilled Occupation List (TOSOL)
Overseas Skilled Occupation Profiles (OSOP)

Lists

  • Critical Roles List: An occupation included in the 'Critical Roles List' will be prioritised in the Migration Tasmania Gateway.
  • Tasmanian Onshore Skilled Occupation List (TOSOL): An occupation included in the TOSOL is eligible for subclass 190 nomination after 6 months employment in a closely related role. Occupations that are not on the TOSOL are eligible for subclass 190 nomination in the 'Tasmanian Skilled Employment' pathway after 15 months of related employment.
  • Overseas Skilled Occupation Profiles (OSOP): An occupation included in the OSOP list is eligible for the 'Overseas Applicant (OSOP) – Invitation Only' pathway (subclass 491 only).

Pathway Eligibility

711113: Glass Production Machine Operator
PathwaySubclass 190Subclass 491
Tasmanian Skilled Employment
Tasmanian Skilled Graduate
Tasmanian Established Resident
Tasmanian Business Operator
Overseas Applicant (Job Offer)
Overseas Applicant (OSOP) – Invitation Only
  • Occupation is IN the state occupation list and MAY be eligible if you meet the specific state nomination requirements
  • Occupation is IN the Skilled List and MAY be eligible if you meet the state nomination requirements
  • Occupation MAY NOT be eligible
  • Stream NOT applicable to the visa Subclass

Victoria

Victoria’s 2023-24 Skilled Visa Nomination Program

To be selected to apply for Victorian skilled visa nomination, candidates must complete and submit a Registration of Interest (ROI) for Victorian State Visa Nomination.

All occupations included in the Skilled List(MLTSSL, STSOL or ROL list) are eligible for nomination if the candidate meets the Victoria nomination criteria.

This occupation is NOT included in the Skilled List (MLTSSL, STSOL and ROL) and may not be eligible for nomination.

The following occupation groups are prioritised:

  • Health
  • Social services
  • Information Communication Technology (ICT)
  • Early childhood, primary, secondary, and special education teachers
  • Advanced manufacturing
  • Infrastructure
  • Renewable energy
  • Hospitality and tourism (491 visa only)

General Requirements for 'Skilled Nominated visa (subclass 190)'

Candidates applying for Subclass 190 nomination must:

  • Have an occupation on the Skilled List (MLTSSL, STSOL or ROL list).
  • Have had their Registration of Interest (ROI) selected.
  • If onshore, be living in Victoria at the time of nomination.
  • If onshore and claiming earnings from skilled employment in the ROI, the employer must be physically located in Victoria.
  • Be committed to living in Victoria.

General Requirements for 'Skilled Work Regional (Provisional) visa (subclass 491)'

Onshore Candidates must:

  • Have an occupation on the Skilled List (MLTSSL, STSOL or ROL list).
  • Have had their Registration of Interest (ROI) selected.
  • Be living and working in skilled employment in regional Victoria at the time of nomination. Candidates who are not working, or working in non-skilled employment, are not eligible to apply for nomination.
  • Be committed to living in regional Victoria.

Offshore Candidates must:

  • Have an occupation on the Skilled List (MLTSSL, STSOL or ROL list). Offshore candidates for 491 visas with skills in healthcare, social services and education will be prioritised.
  • Have had their Registration of Interest (ROI) selected.
  • Be committed to living in regional Victoria.

Western Australia

Western Australia occupation lists (WASMOL Schedule 1 & 2, and Graduate)

711113: Glass Production Machine Operator
Stream TypeStatusSubclass 190Subclass 491Minimum PointsPriority OccupationComments
Not AvailableNN

General Requirements

Candidates may be nominated under two streams:

Applicants for the General stream must satisfy Schedule 1 or Schedule 2 criteria, depending on their occupation.

Schedule 1 criteria, candidates must have:

  • An occupation on the WASMOL – Schedule 1 (Health & Medical Occupations).
  • Competent English.
  • At least one year of relevant Australian or overseas work experience.
  • At least 6-months full-time contract of employment in Western Australia (only applicable for Subclass 190 visa applicants, and except for those invited through a WA building and construction industry sector occupation).

Schedule 2 criteria, candidates must have:

  • An occupation on the WASMOL – Schedule 2.
  • Competent English.
  • At least 6-months full-time contract of employment in Western Australia (only applicable for Subclass 190 visa applicants, and except for those invited through a WA building and construction industry sector occupation).

WA Graduates must have:

  • An occupation on the GOL.
  • Studied at an accredited Western Australian educational institution, full-time and face-to-face, for at least two years.
  • Completed a Cert. III or higher qualification in a Western Australian university, higher education provider, TAFE, registered training provider or English language provider.
  • Competent English.
The above is a summary of key/essential eligibility criteria; it is not an exhaustive list of requirements. You are encouraged to check all criteria on the relevant State/Territory website.

Migration Program Planning Levels 2023-24

State & Territory Visa Allocations 2023-24

State / TerritoryNominated Subclass 190Work Regional Subclass 491Business Innovation & Investment Program
(BIIP)
ACT6006000
NSW2,6501,5000
NT2504000
QLD9006500
SA1,1001,2000
TAS6006000
VIC2,7006000
WA1,5008500
TOTAL10,3006,4000

Skill stream

Visa CategoryAllocations 2022-23Allocations 2023-24
Employer Sponsored35,00036,825
Skilled Independent32,10030,375
Regional34,00032,300
State/Territory Nominated31,00030,400
Business Innovation & Investment5,0001,900
Global Talent (Independent)5,0005,000
Distinguished Talent300300
Total Skill stream142,400137,100

Family stream

Visa CategoryAllocations 2022-23Allocations 2023-24
Partner40,50040,500
Parent8,5008,500
Child3,0003,000
Other Family500500
Total Family stream52,50052,500
Special Eligibility100400
 
TOTAL Migration Program195,000190,000

2023-2024 Migration Program planning levels

ANZSCO version 1.3, cat. no. 1220.0
Major Group: 7 - Machinery Operators and Drivers
Sub-Major Group: 71 - Machine and Stationary Plant Operators
Minor Group: 711 - Machine Operators
Unit Group: 7111 - Clay, Concrete, Glass and Stone Processing Machine Operators

Description

Operates machines to manufacture molten glass and shape glassware products such as containers, sheet glass, structural and stained glass, glass lenses and prisms.

Alternative Titles

There are no Alternative Titles for this occupation

Specialisations

  • Glass Furnace Operator
  • Glass Laminating Operator
  • Glass Maker
  • Glass Melt Operator
  • Glass Toughening Operator
  • Glassware Maker

Alternative titles are any commonly used alternative title (or titles) for the occupation. These alternative titles have the same meaning as the principal title but may be less commonly used.

Specialisation titles are any commonly used titles which refer to a subset of jobs belonging to the occupation designated in the principal title. These jobs involve the performance of specialised tasks rather than the broader range of tasks usually performed in the occupation.

2023 Skills Priority List

The Skills Priority List (SPL) provides a detailed view of occupations in shortage in Australian and by each state and territory. The SPL is released annually by Jobs and Skills Australia

Occupation Ratings: S Shortage; NS No Shortage; R Regional Shortage
National Future Demand:c Below economy average;b At economy average;a Above economy average

711113: Glass Production Machine Operator
National Future DemandNationalACTNSWNTQLDSATASVICWA
bNSNSNSNSNSNSNSNSNS

What is the Skills Priority List (SPL)?
Jobs and Skills Australia – Skills Shortages Analysis

Unit Group 7111: Clay, Concrete, Glass and Stone Processing Machine Operators

Description

Operate machines to manufacture and finish a variety of clay, concrete, glassware and stone products by extruding, shaping, mixing, grinding, cutting and other processes.

Indicative Skill Level  4

Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.

In Australia:

AQF Certificate II or III (ANZSCO Skill Level 4)

In New Zealand:
NZQF Level 2 or 3 qualification (ANZSCO Skill Level 4)

At least one year of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks

  • Monitoring the flow of clay and other raw materials and products into machines, and adjusting valves and controls to specifications
  • Positioning clay and stone on machines to be cut and worked
  • Operating concrete mixing, stacking and splitting machines
  • Setting up and installing moulds and other machine fixtures
  • Setting up and operating glass-making machines to produce molten glass, and regulating temperature of molten glass
  • Pressing and blowing glass into moulds to form glassware products
  • Collecting and examining samples for conformity to specifications and adjusting machine settings accordingly
  • Setting grinding and cutting edges
  • Using hand tools to cut, inscribe and polish roughly hewn stone to finished condition

Occupations in this Unit Group

  • 711111: Clay Products Machine Operator
  • 711112: Concrete Products Machine Operator
  • 711113: Glass Production Machine Operator
  • 711114: Stone Processing Machine Operator
  • 711199: Clay, Concrete, Glass and Stone Processing Machine Operators nec

Average Salary 2021

Unit Group 7111: Clay, Concrete, Glass and Stone Processing Machine Operators

TypeWeekly EarningsAnnual SalaryAverage Age
Males not available for publication but included in totals where applicable, unless otherwise indicated not available for publication but included in totals where applicable, unless otherwise indicated
Females not available for publication but included in totals where applicable, unless otherwise indicated not available for publication but included in totals where applicable, unless otherwise indicated
Persons$ 1,245.20 $ 64,75044.2

Complete list of Average Salary 2021 by occupation

Australian Bureau of Statistics, 2013, ANZSCO - Australian and New Zealand Standard Classification of Occupations, 2013, Version 1.3, cat. no. 1220.0, https://www.abs.gov.au/ausstats/abs@.nsf/mf/1220.0 

SkillSelect EOI Backlog

EOI Data Current to 30/09/2023

Total Count EOIs @ 30/09/2023

Visa TypeSubmittedInvitedLodged
188 Business Innovation3,2432,636
189 Skilled Independent123,92226021,018
190 State/Territory Nominated228,59277936,154
491 State/Territory Nominated (Regional)188,64658322,859
491 Family Sponsored4,536<20704

EOIs by Occupation & Visa Type

711113: Glass Production Machine Operator

189 Skilled Independent

190 State/Territory Nominated

491 State/Territory Nominated

491 Family Sponsored

Notes

  • Counts of EOIs with less than 65 points are not shown.
  • Counts which are less than 20 are shown as '<20'.

EOI Status

SUBMITTED an EOI that meets all requirements for all selected visa subclasses and has all fields completed can be submitted. Once submitted, points are attributed to the EOI based on the information provided. Submitted EOIs are eligible for selection in an invitation round.

INVITED an invitation to apply for a visa has been issued.

LODGED a visa application has been lodged using an invitation to apply for a visa.

This data draws from the SkillSelect EOI Dashboard  and is thus as accurate as the information on that source. This information is intended to provide a general overview of the SkillSelect dataset in a specific point in time, rather than a real-time database.
Anzscosearch will provide this information as long as it remains available on the SkillSelect website.

DAMA - Designated Area Migration Agreement

Occupation NOT in any DAMA list.

Quick Contact


Interested in visiting,studying,working or living in Australia?

Enter your details and we'll call you back. When it suits you.


- Mangyaring magpasok ng impormasyon sa Ingles
Kung ang iyong edad ay mas mababa sa 18 taon, kinakailangan na ang form na ito ay kumpletuhin ng iyong mga magulang.
+ Attach Your Resume (optional)